Thompson Construction was founded in 2014 by brothers Chris & James, who had previously worked as tradesmen and managers for contractors around Yorkshire. Their aim was to be the best, not necessarily the biggest, contractor in the city. They specialise in Design & Build projects, taking on the entire construction process to relieve stress for the client.
They also undertake refurbishments and new build residential projects, priding themselves on professionalism and listening to the client's vision. They have extensive experience working on impressive refurbs and developments for clients such as Arco, Motor Depot, and Rradar Hull, as well as industrial units and building conversions. As principal contractors, they manage the whole project from start to finish and maintain strong relationships with architects, designers, and repeat clients across various sectors.
Their approach ensures high standards of workmanship and client satisfaction, with a focus on delivering projects on time and within budget.
Extension to existing storage warehouse to house new fleet of electric powered forklifts. Challenges included overhead power lines, high water tables, untraced drainage runs and site levels. Main works consisted of steel frame with composite cladding, new up & over doors and power floated floor. Piling was required due to bad ground, along with ground beam reinforcement and slab reinforcement. Internally, the split from old to new had to be 1 hour fire protected due to the end use of the building to charge electric vehicles.
Client · Crown Paints Limited
Hastings Medical Centre
Hull
Extension of the existing surgery and full renovation of the existing building to produce a doctor's surgery. Included two extensions, internal structural alterations, full Plumbing, electrical, fire, CCTV, Intruder and nurse call system with drainage diversions, and external carparking. The site was tight and tricky to work on and manage.
Client · Hastings Medical Centre
Bee Health Ltd
Carnaby Bridlington
Build a new industrial unit to serve as their new Drying tunnel, connecting onto the existing building from both ends and featuring a mezzanine first floor for plant. The building is steel framed with cladding, concrete floor, internal hygienic cladded walls and ceilings with resin floors, complete with full power, lighting and fire detection. Additionally, a first-floor Vegan rooms with ground floor adaptions and alteration within part of the existing factory were included.
Client · Bee Health Ltd
Swift Holdings (UK) Limited
Cottingham
Build an extension of the existing production unit, extending it by another 60,000 Sq. Ft. The extension is of a portal frame type sat on pad foundations, complete with composite roof cladding and a built-up cladding system to the walls. The structural concrete floor was designed and installed to FM2. Large roller shutter doors were installed to each gable end. Externally comprised of a tarmac finish, Armco safety barriers and a new surface water drainage system.
Client · Swift Holdings (UK) Limited
Swift Holdings (UK) Limited
Cottingham
Built a new 10,000 sq. Ft. building for a new client, comprising a new commercial kitchen, toilets, and a large open plan seating space for employees. Attached to the building is an outdoor space for 'alfresco eating' covered with Brise Solaire.
Client · Swift Holdings (UK) Limited
Heald Limited
Hornsea
Create an additional manufacturing space, a new 20,000 sq. Ft industrial unit. 90 percent of the building is for manufacturing with the remaining 10 percent for a new welfare area and office space. External requirements included a concrete yard and an attenuation pond for all the sites surface water.
Client · Heald Limited
Farmhouse Potato Bakers
Carnaby Industrial Estate, Bridlington
A 4,600 sq. ft building with a new storage and racking area, new welfare area and new production area, including hygienic walls, walk on ceiling and a new Ucrete floor with concrete plinth upstands. The build was challenging due to poor ground conditions, the fall of the land, and the client needing to remain running 24/7.
Client · Farmhouse Potato Bakers
Motor Depot
Handsworth Road Sheffield
Refurbish the existing building which used to be an existing garage. Works included refurbishment of the workshops, new and existing roof work, new and refurbishing office space, new and refurbishing welfare areas and parts room. Extended the front of the building to give it a more modern look, which became the new showroom and sales room.
Client · Motor Depot
Motor Depot
Barnsley
Build an internal 10,000 Sq. Ft industrial unit within an existing industrial unit, creating a new workshop with car ramps, preparation bays, offices, and welfare facilities. Extended the sales area building in managers offices and fully fitting out the offices including Mechanic and electrical, Flooring, Fire rated glazing ceilings and decoration.
Client · Motor Depot
Leisure Electronics
Hull
A 2,200 sq. ft extension to the existing industrial unit with limited access and presence of utilities. Installed a new mezzanine floor to create a new first-floor storage area. Within the existing building, installed a new first-floor office space over the existing ground-floor rooms (3000 sq. ft), including kitchen break-out area, glazed partitioning and green rooms.
Client · Leisure Electronics
Jenneson Thompson Investments Ltd
Hull
Alterations & refurbishment of two properties knocked into a large grade A office space including modern break-out areas, board room, themed offices and a new internal modern staircase. Set over two floors with a third floor added within the existing roof space.
Client · Jenneson Thompson Investments Ltd
Jenneson Thompson Investments Ltd
Hull
Internal alterations and refurbishments of a 120-year-old property. Scope included internal removal of all walls and staircases, separating the two floors, opening the building to the neighbouring property, installing new first-floor access and internally fitting out each floor to a Grade A office specification. Thompson Construction currently occupy part of the ground floor as their head office.
Questions about Thompson Construction (Yorkshire) Ltd from the record on this page
What does Thompson Construction (Yorkshire) Ltd do?
Hull based building contractor Thompson Construction have worked on projects all over the UK, from business interior fit outs to new build housing. Their listed services include Main contractor, Design & build, Refurbishment, Fit-out & interiors and Extensions.
Where is Thompson Construction (Yorkshire) Ltd based?
Thompson Construction (Yorkshire) Ltd is registered at Suite 2, Avenue House, 157 High Street, Hull, HU1 1NQ, in Yorkshire.
What areas does Thompson Construction (Yorkshire) Ltd cover?
Thompson Construction (Yorkshire) Ltd states that it works across Yorkshire.
How many people work at Thompson Construction (Yorkshire) Ltd?
Accounts filed for the year to 2025 report 18 employees, which places the company in the 10-49 employees band.
What is Thompson Construction (Yorkshire) Ltd's turnover?
Thompson Construction (Yorkshire) Ltd does not disclose turnover: UK small-company accounts are not required to. Based on headcount and trade debtors in its filed accounts, turnover is likely to fall between £820k and £2.2m. This is an estimate, not a filed figure.
Is Thompson Construction (Yorkshire) Ltd still trading?
Companies House lists Thompson Construction (Yorkshire) Ltd as active, with accounts most recently made up to 2025-03-31.
What sectors does Thompson Construction (Yorkshire) Ltd work in?
Thompson Construction (Yorkshire) Ltd works in Commercial, Industrial, Residential, Healthcare and Retail.
When was Thompson Construction (Yorkshire) Ltd established?
Thompson Construction (Yorkshire) Ltd was incorporated on 2014-03-31.
See where your project budget stands now, not after month-end
Planyard keeps budgets, committed costs and variations live, so the figure in front of you is today's rather than last month's.
