Cutter Solar is a family-run renewable energy installations company established in 2005, specializing in Solar PV and Energy storage systems. They are MCS accredited installers for both PV and Battery Storage systems and are also NICEIC approved Electrical Contractors. Recently, they have launched 'Cutter Cool' for domestic Air Conditioning installations, offering energy-efficient heating and cooling solutions.
The company, based in Ross-On-Wye, Herefordshire, carries out domestic, commercial, industrial, and agricultural contracts throughout the UK. They pride themselves on providing quality installations, using qualified staff who are directly employed by the company, and tailoring solutions to each client's specific situation. Cutter Solar emphasizes a simple, no-pressure approach and excellent pre, during, and post-sales service, which has led to repeat business and strong customer relationships.
4KW PV system with 5.8KWh Energy Storage system. Install a PV and energy storage system that will reduce the customer's grid consumption by around 75% and help reduce their carbon footprint. The Customer's would also like us to help set them up with the best Export tariff for their situation. We installed 12 no. Tier 1 All- Black PV Modules to the South-facing Roof and fitted a 3.7KW Hybrid Inverter and 5.8KWh Battery in the garage.
M5 Motor Homes/ Energie Gym, Cheltenham. 138 no. Canadian solar PV Modules with 2 no. 25KW SolaX String Inverters. Commercial Project on specialist Curved roof. Find a fixing system that can safely fit the roof material and fit a system that can reduce the Energy consumption of the Motorhome workshop, and also the adjoining Gym, that has a high level of usage from the air conditioning system.
Equestrian Centre, Monmouthshire. 138 no. Canadian solar PV Modules with solaX Inverters. The existing site had a small single-phase supply. The Owners planned a major expansion to include equestrian facilities, workshops, accommodation and revamped farmhouse. It was our job to design a suitable three-phase supply for the new site, then liaise with the local DNO (Western Power) to ensure this was fitted within the timescales of the project, and help arrange metering and export contracts. Once it was confirmed the DNO could put this in place we designed a suitable PV system for the site that would sit on the new steel framed building, and would supply the site with 30KWp of Clean solar power.
Materials, 62 no. PV Modules and SolaX Hybrid inverters, 3 no. SolaX 5.8KWh Batteries. We had previously Installed 2 x Commercial scale PV systems on this site, and the customer wanted to expand his renewable generation further, and add battery storage to capture the energy from all 3 systems in times of excess generation. Cutter Solar handled the whole application process with the local DNO, and gained permission for an additional 25KW of solar generation with 17.4KWh Battery storage.
Customer has a three-phase domestic supply and is looking to maximise PV Output to supply Ground source Heat pump. Having previously fitted a 4KW single-phase system on the customer's house roof, we helped the customer undergo a major revamp of his energy system, including arranging a new 3-phase supply to the property (We carried out all the electrical work to facilitate this), supply for ground source heat pump, and provision for a back-up generator. We added a further 20KW of Solar PV generation, including this 10KW Ground-mounted solar array. We initially fitted 4 no. 5.8KWh batteries, but have since been back to fit 4 more … Giving a total of 46.4KWh of Energy storage!
Cutter Solar carry out specialist projects and can design systems to fit into any install environment. This project was on a pre-fabricated building, built in a factory in North Herefordshire. This is where we fitted the PV modules. They were special Metrotile inset modules. We have worked successfully with Metrotile on various projects over the years. The unit was then transported to a beach in Dorset, where we connected the system to the local grid.
Mr and Mrs Clark had a 2KW PV system fitted over 10 years ago, and wanted to maximise its efficiency. They also suffered from occasional powercuts, so wanted a system that could supply power in this event. We recommended the Givenergy all in one, as it is AC-coupled, so wouldn't affect their FIT arrangement, had the large amount of storage they wanted, and could supply the property in the event of a powercut. The property has a large basement garage, which is also where the consumer unit is situated, so we fitted the battery unit 'out of the way' in there, and we have since been back to fit a Zappi EV charger.
4KW PV system with 5.8KWh Energy Storage system. Install a PV and energy storage system that will reduce the customer's grid consumption by around 75% and help reduce their carbon footprint. The Customer's would also like us to help set them up with the best Export tariff for their situation. We installed 12 no. Tier 1 All- Black PV Modules to the South-facing Roof and fitted a 3.7KW Hybrid Inverter and 5.8KWh Battery in the garage.
Cutter Solar have installed a thermal solar hot water system which has performed flawlessly for nine years, a Givenergy battery storage system which has helped to make huge savings on our electricity costs, and an electric vehicle charger. All this work has been carried out to a high standard by polite, informative engineers who have left the work site clean and tidy.
Tom Cutter has done a fabulous job from start to finish on our quite sizeable project. He was able to help with technical spec to the Grid and Ofgem which was way beyond my skill set and the system all works seamlessly. The design and installation went very smoothly and was up and running without any hiccups. Tom also explained the functionality etc. of the system after the installation and has always been on hand if we needed answers to any questions.
Our requirement was not straightforward as we already had a smaller PV system and were looking to triple the size to take advantage of recently installed three phase supply and relocation of meters. Cutter Solar carried out all of the design, assisted with the liaison with National Grid and carried out all of the installation work. The system performs exactly as promised with a simple clear monitoring system and the quality of the electrical work, and the installation as a whole, is second to none.
Questions about Cutter Solar Ltd from the record on this page
What does Cutter Solar Ltd do?
Family-run renewable energy installers specializing in Solar PV, Energy Storage, and Air Conditioning. MCS accredited and NICEIC approved. Their listed services include Solar PV, EV charging, Electrical and Air conditioning.
Where is Cutter Solar Ltd based?
Cutter Solar Ltd is registered at ROSS-ON-WYE, HR9 5LA, in West Midlands.
What areas does Cutter Solar Ltd cover?
Cutter Solar Ltd states that it works across Nationwide.
Is Cutter Solar Ltd still trading?
Companies House lists Cutter Solar Ltd as active.
What accreditations does Cutter Solar Ltd hold?
Cutter Solar Ltd displays MCS, NICEIC, RECC and F Gas Certified on its website.
What sectors does Cutter Solar Ltd work in?
Cutter Solar Ltd works in Residential, Commercial, Industrial, Agricultural and Energy.
When was Cutter Solar Ltd established?
Cutter Solar Ltd was incorporated on 2010-08-16, though the company says it has traded since 2005.
Live project visibility for contractors
Track budgets, committed costs, invoices and profitability in one place, so cost issues show up before they turn into margin surprises.
